Progressive failure analysis of notched composite plate by utilizing macro mechanics approach

In this study, gradual and sudden reduction methods were combined to simulate a progressive failure in notched composite plates using a macro mechanics approach. Using the presented method, a progressive failure is simulated based on a linear softening law prior to a catastrophic failure, and thereafter, sudden reduction methods are employed for modeling a progressive failure. This combination method significantly reduces the computational cost and is also capable of simultaneously predicting the first and last ply failures (LPFs) in composite plates. The proposed method is intended to predict the first ply failure (FPF), LPF, and dominant failure modes of carbon/epoxy and glass/epoxy notched composite plates. In addition, the effects of mechanical properties and different stacking sequences on the propagation of damage in notched composite plates were studied. The results of the presented method were compared with experimental data previously reported in the literature. By comparing the numerical and experimental data, it is revealed that the proposed method can accurately simulate the failure propagation in notched composite plates at a low computational cost.     

Development of a H2-permeable Pd60Cu40-based composite membrane using a reverse build-up method

A new reverse build-up method is developed to fabricate an economical H₂-permeable composite membrane. Sputtering and electroplating are used for the formation of a membrane comprised of a 3.7-μm-thick Pd₆₀Cu₄₀ (wt.%) alloy layer and a 13-μm-thick porous Ni support layer, respectively. The H₂-permeation measurements are performed under the flow of a gaseous mixture of H₂ and He at 300–320 °C and 50–100 kPa of H₂ partial pressure. The H₂/He selectivity values exceed 300. The activation energy at 300–320 °C is 10.9 kJ mol⁻¹. The H₂ permeability of the membrane is 1.25 × 10⁻⁸ mol m⁻¹ s⁻¹ Pa^−0.5 at 320 °C after 448 h. The estimated Pd cost of the proposed membrane is approximately 1/8 of the cost for a pure Pd₆₀Cu₄₀ membrane. This study demonstrates that the proposed method allows the facile production of low-cost, Pd-based membranes for H₂ separation.     

Deep eutectic solvent-based supramolecular gel polymer electrolytes for high-performance electrochemical double layer capacitors

Gel polymer electrolytes (GPEs) can avoid the electrolyte leakage risk of electrochemical double layer capacitors (EDLCs). But aqueous GPEs often suffer from narrow electrochemical windows. Herein, a series of deep eutectic solvent (DES)-based supramolecular GPEs are firstly developed for carbon-based EDLCs with wide voltage windows. The as-fabricated DES-based GPE shows an ionic conductivity of ~58 mS cm^?1, which makes the stable voltage window of a carbon-based EDLC reach 2.4 V. The carbon-based EDLC exhibits a specific capacitance of 32.1 F g^?1, an energy density of 24.6 Wh kg^?1 and a capacitance retention of ~90% after 15,000 charge-discharge cycles. Moreover, when quinhydrone is added into the DES-based GPE, the specific capacitance and energy density of the corresponding EDLC can be further expanded to 60 F g^?1 and 43.6 Wh kg^?1, respectively. Therefore, our work may present a universal strategy to prepare novel supramolecular GPEs for high-performance EDLCs with wide voltage windows.     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

Effect of the ZIF‐8 Distribution in Mixed‐Matrix Membranes Based on Matrimid® 5218‐PEG on CO2 Separation

In theory, the combination of inorganic materials and polymers may provide a synergistic performance for mixed‐matrix membranes (MMMs); however, the filler dispersion into the MMMs is a crucial technical parameter for obtaining compelling MMMs. The effect of the filler distribution on the gas separation performance of the MMMs based on Matrimid®‐PEG 200 and ZIF‐8 nanoparticles is demonstrated. The MMMs were prepared by two different membrane preparation procedures, namely, the traditional method and non‐dried metal‐organic framework (MOF) method. In CO₂/CH₄ binary mixtures, the MMMs were tested under fixed conditions and characterized by various methods. Finally, regardless of the MMM preparation procedure, the incorporation of 30 wt % ZIF‐8 nanoparticles allowed to increase the CO₂ permeability in MMMs. The ZIF‐8 dispersion influenced significantly the separation factor.     

纳米碳化钒/碳化铬复合粉末的微波辅助高能球磨合成及其应用

以微米级氧化钒(V2O5)、氧化铬(Cr2O3)和纳米碳黑为原料，采用机械合金化及微波辅助加热法制备了纳米碳化钒/碳化铬复合粉末。利用XRD、XPS、TG-DSC、SEM、TEM和BET对产物进行了分析表征。结果表明，：纳米碳化钒/碳化铬复合粉末的最佳合成条件为：碳的质量分数为35%，反应温度为900℃，保温时间为1h。在该条件下的反应产物主要由V3Cr2C5、Cr2VC2和Cr3C2组成，颗粒为球形或类球形，分散性较好，无明显团聚现象，平均颗粒尺寸约为50nm，复合粉末的比表面积为115.53m2/g。添加纳米碳化钒/碳化铬复合粉末可以提高陶瓷结合剂cBN磨具的力学性能和磨削效率，降低磨具的损耗，并且对磨具具有减摩作用。     

亲水作用色谱-串联质谱法测定动物源运动食品中3种氨基糖苷类抗生素的残留量

该研究建立了一种亲水交互作用色谱-串联质谱（HILIC-MS/MS）法测定动物源运动食品中潮霉素B、新霉素、安普霉素3种氨基糖苷类抗生素残留量的方法。结果表明，样品经Sielc Obelisc R柱分离，采用0.1%甲酸水溶液-乙腈梯度洗脱，可以实现3种目标物组分的分离。在此条件下，3种氨基糖苷类抗生素在5～500 ng/mL的质量浓度范围内线性关系良好，相关系数R2为0.999 5～0.999 9，检出限均为15 μg/kg，定量限均为50 μg/kg，保留时间的日间和日内相对标准偏差（RSD）分别为3.5%～7.9%和3.5%～4.1%，峰面积的日间和日内RSD分别为3.6%～7.4%和3.2%～3.9%，加标回收率为85.7%～93.6%，回收率试验结果的RSD为3.1%～5.2%。该方法可以满足动物源运动食品中3种氨基糖苷类抗生素的检测需求。     

基于柠檬酸-铕纳米配位聚合物构建荧光探针快速检测汤煲中5’-肌苷酸含量

基于柠檬酸-铕金属有机纳米配体聚合物（citrate/europium lanthanide coordination polymer nanoparticles，Cit/Eu LCP NPs）构建快速检测肉品汤煲中5’-肌苷酸（inosine-5’-monophosphate，5’-IMP）的荧光探针。研究结果表明，5’-IMP对Cit/Eu?LCP?NPs有良好的荧光猝灭作用。在最佳条件下，该荧光探针在5’-IMP?2.5～200?μg/mL的质量浓度范围内呈现出良好的线性关系，检出限为0.17?μg/mL，且具备良好的抗干扰、稳定性和重复性。为了验证方法可行性，将该方法应用于实际鸡汤样品中的5’-IMP检测，测得加标回收率为97.85%～103.95%，可为快速检测肉品汤煲中5’-IMP提供新的思路和方法。     

Modification of narrow‐spectrum peptidomimetic polyurethanes with fatty acid chains confers broad‐spectrum antibacterial activity

Each year, thousands of patients die from antimicrobial‐resistant bacterial infections that fail to respond to conventional antibiotic treatment. Antimicrobial polymers are a promising new method of combating antibiotic‐resistant bacterial infections. We have previously reported the synthesis of a series of narrow‐spectrum peptidomimetic antimicrobial polyurethanes that are effective against Gram‐negative bacteria, such as Escherichia coli; however, these polymers are not effective against Gram‐positive bacteria, such as Staphylococcus aureus. With the aim of understanding the correlation between chemical structure and antibacterial activity, we have subsequently developed three structural variants of these antimicrobial polyurethanes using post‐polymerization modification with decanoic acid and oleic acid. Our results show that such modifications converted the narrow‐spectrum antibacterial activity of these polymers into broad‐spectrum activity against Gram‐positive species such as S. aureus, however, also increasing their toxicity to mammalian cells. Mechanistic studies of bacterial membrane disruption illustrate the differences in antibacterial action between the various polymers. The results demonstrate the challenge of balancing antimicrobial activity and mammalian cell compatibility in the design of antimicrobial polymer compositions. © 2019 Society of Chemical Industry     

Improved rheological properties and stability of multiwalled carbon nanotubes/polymer in harsh environment

This work aims to improve the rheological properties and stability of multiwalled carbon nanotubes (MWCNTs)/acrylamide (AA) base skeleton polymer blends at harsh environment of high salinity-high temperature (HS-HT) or various pH. Different co/terpolymers have been accomplished to modify the structure of AA polymer by free-radical copolymerization of AA-based monomers. Anionic, cationic, and hydrophobic functional groups were used for the synthesis of polyelectrolyte, polyampholytic, and partially hydrophobic AA polymer types. The conversion, molecular weight, and poly dispersity of co/terpolymers have been evaluated by nuclear magnetic resonance (¹H-NMR), gel permeation chromatography, and differential scanning calorimetry analysis. The effects of sonication power, concentration of polymer, and concentration of MWCNTs were also investigated on rheological behavior of co/terpolymers. The results show that negative polyelectrolyte and polyampholytic polymers are the best candidates for the improvement of MWCNTs/polymer stability and viscosity at HS-HT and alkali environment, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47205.